ZH
KR
JP
ES
RU
DE

How to measure glass size

How to measure glass size, Total:388 items.

In the international standard classification, How to measure glass size involves: Radiation measurements, Photography, Packaging and distribution of goods in general, Bottles. Pots. Jars, Equipment for the chemical industry, Surface treatment and coating, Glass, Paint ingredients, Pharmaceutics, Medical equipment, Materials for the reinforcement of composites, Seals, glands, Aerosol containers, Miscellaneous domestic and commercial equipment, Analytical chemistry, Ceramics, Lamps and related equipment, Pipeline components and pipelines, Measurement of volume, mass, density, viscosity, Elements of buildings, Horology, Construction materials, Kitchen equipment, Refractories, Electronic tubes, Thermodynamics and temperature measurements.

AENOR, How to measure glass size

• UNE 43404:1997 GLASS TUBING. GLASS-BUBBLES. DIMENSIONS AND DEFINITIONS.
• UNE 126102:2011 Glass containers. Dimensional relationships for a normal glass container.
• UNE 126108:2005 Glass containers. Positioning notchs. Dimensional characterisitics.
• UNE-EN 14635:2011 Glass packaging - 26 H 126 crown finish - Dimensions
• UNE-EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish
• UNE-EN 14798:2006 Glass packaging - Hand-held crown bottle openers - Dimensions
• UNE-EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
• UNE-EN ISO 12821:2015 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013)
• UNE-EN 1279-1:2006 Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
• UNE 22141:1964 CLASSIFICATION, BY SIZES, OF THE MALLET MUSCOVY GLASS, THIN SHEETS AND PLATES.

CU-NC, How to measure glass size

• NC 97-75-1986 Packaging. Sand Glass Dimensions Determination

Professional Standard - Chemical Industry, How to measure glass size

• HG/T 2637~2638-2017 Inspection method of geometric dimensions of glass-lined parts and quality classification of glass-lined equipment (2017)
• HG/T 2637-2011 Method for detecting geometric dimensions of glass-lined parts
• HG/T 2637-2007 Detecting methods of geometry dimension for glass-lined parts
• HG/T 2637-1994 Method for detecting geometric dimensions of glass-lined parts

TH-TISI, How to measure glass size

• TIS 1728-1998 Dimensions of test tubes made of glass or plastics for radioactivity measurements

American National Standards Institute （ANSI), How to measure glass size

• ANSI PH1.23-1992 Photography - Glass Plates - Dimensions
• ANSI/ASTM D3567:1997 Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

International Electrotechnical Commission (IEC), How to measure glass size

• IEC 60583:1977 Dimensions of test tubes made of glass or plastics for radioactivity measurements
• IEC 60583A:1981 Dimensions of test tubes made of glass or plastics for radioactivity measurements.

SCC, How to measure glass size

• UNE 126102:2004 Glass containers. Glass terminology. Dimensional relation ships for a normal glass container.
• DANSK DS/ISO 14548:2021 Photography – Dimensions of glass plates
• UNE 20626/1C:1983 DIMENSIONS OF TEST TUBES MADE OF GLASS OR PLASTICS FOR RADIOACTIVITY MEASUREMENTS
• UNE 20626:1979 DIMENSIONS OF TEST TUBES MADE OF GLASS OR PLASTICS FOR RADIOACTIVITY MEASUREMENTS
• BS ISO 8162:1985 Glass containers. Tall crown finishes. Dimensions
• BS EN ISO 12543-5:1998 Glass in building. Laminated glass and laminated safety glass-Dimensions and edge finishing
• NS 3202:1986 Glazing - Metod for checking dimensions
• BS ISO 8163:1985 Glass containers. Shallow crown finishes. Dimensions
• UNE 92209:1989 THERMAL INSULTAION MATERIALS. FIBER GLASS PRODUCTS. DIMENSIONS DETERMINATION.
• NS-EN 14854:2021 Glass packaging – Dimensions of neck finishes for aerosol and spray glass containers
• DANSK DS/EN ISO 12543-5:2011 Glass in building – Laminated glass and laminated safety glass – Part 5: Dimensions and edge finishing
• DANSK DS/ISO 12821:2019 Glass packaging – 26 H 180 crown finish – Dimensions
• NS-EN 14634:2010 Glass packaging — 26 H 180 crown finish — Dimensions
• UNE-EN 14634:2005 Glass packaging - 26 H 180 crown finish - Dimensions
• UNE-EN 14634:2011 Glass packaging - 26 H 180 crown finish - Dimensions
• DANSK DS/ISO 12543-5:2022 Glass in building – Laminated glass and laminated safety glass – Part 5: Dimensions and edge finishing
• DIN EN 17829 E:2022 Draft Document - Glass packaging - 28 millimetre-screw finishes for glass containers (MCA range) - Dimensions; German and English version prEN 17829:2022
• BS 539:1934 Dimensions of drain fittings salt-glazed ware and glass (vitreous) enamelled fire clay
• NS-EN 14635:2010 Glass packaging — 26 H 126 crown finish — Dimensions
• NS-EN 14854:2005 Aerosol containers — Glass containers — Dimensions of the neck finish
• BS 539:1937 Dimensions of drain fittings salt-glazed ware and glass (vitreous) enamelled fire clay
• NS-EN 14634:2004 Glass packaging — 26 H 180 crown finish — Dimensions
• NS-EN 14635:2004 Glass packaging — 26 H 126 crown finish — Dimensions
• UNE-EN 14635:2005 Glass packaging - 26 H 126 crown finish - Dimensions
• DANSK DS/EN 14635:2010 Glass packaging – 26 H 126 crown finish – Dimensions
• DANSK DS/EN 14854:2005 Aerosol containers – Glass containers – Dimensions of the neck finish
• DIN EN ISO 12821 E:2018 Draft Document - Glass packaging - 26 H 180 crown finish - Dimensions; German and English version prEN ISO 12821:2018
• NS-EN ISO 12543-5:2011 Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
• DIN EN 14634 E:2009 Draft Document - Glass packaging - 26 H 180 crown finish - Dimensions; German version prEN 14634:2009
• DANSK DS/EN 14798:2005 Glass packaging - Hand-held crown bottle openers - Dimensions
• BS ISO 9100:1992 Wide-mouth glass containers. Vacuum lug finishes. Dimensions
• AENOR UNE-EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
• NS-EN ISO 12543-5:1998 Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing (ISO 12543-5:1998)
• NS-EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
• NS-EN 14798:2005 Glass packaging — Hand-held crown bottle openers — Dimensions
• 08/30170610 DC BS EN ISO 12543-5. Glass in building. Laminated glass and laminated safety glass. Part 5. Dimensions and edge finishing
• BS 539-1:1951 Dimensions of drain fittings salt-glazed ware and glass (vitreous) enamelled salt-glazed fire clay
• NS-EN ISO 12822:2020 Glass packaging — 26 H 126 crown finish — Dimensions (ISO 12822:2020)
• UNE-EN ISO 12543-5:1999 GLASS IN BUILDING. LAMINATED GLASS AND LAMINATED SAFETY GLASS. PART 5: DIMENSIONS AND EDGE FINISHING. (ISO 12543-5:1998).
• DIN EN 14635 E:2009 Draft Document - Glass packaging - 26 H 126 crown finish - Dimensions; German version prEN 14635:2009
• DANSK DS/EN ISO 12821:2019 Glass packaging – 26 H 180 crown finish – Dimensions (ISO 12821:2019)
• DIN EN ISO 12543-5/A100 E:2023 Draft Document - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021); German version EN ISO 12543-5:2021; Amendment A100
• DANSK DS/EN 17829:2023 Glass packaging – 28 millimetre-screw finishes (MCA range) – Dimensions
• 09/30194915 DC BS EN 14635. Glass packaging. 26 H 126 crown finish. Dimensions
• NS-EN ISO 12821:2019 Glass packaging – 26 H 180 crown finish – Dimensions (ISO 12821:2019)
• DANSK DS/EN ISO 12822:2020 Glass packaging – 26 H 126 crown finish – Dimensions (ISO 12822:2020)
• 09/30194911 DC BS EN 14634. Glass packaging. 26 H 180 crown finish. Dimensions
• DANSK DS/EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: Dimensions
• BS 5503-1:1977 Vitreous china washdown WC pans with horizontal outlet-Connecting dimensions
• 12/30264541 DC BS ISO 12821. Glass packaging. 26 H 180 crown finish. Dimensions
• AS 3572.4:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 4: Determination of the dimensions of glass filament reinforced plastics pipes
• 12/30264544 DC BS ISO 12822. Glass packaging. 26 H 126 crown finish. Dimensions
• BS 5187:1975 Specification for standard sizes of silica refractories for use in glass melting furnaces
• DANSK DS/EN 572-8+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
• NS-EN 1279-1:2004 Glass in Building — Insulating glass units — Part 1: Generalities, dimensional tolerances and rules for the system description
• DANSK DS/EN 572-8:2004 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• BS 364:1934 Neck and flange dimensions of illumination glassware and carriers
• AENOR UNE-EN 572-8:2013 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• NS-EN 14849:2005 Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules
• NS-EN 572-8:2012 Glass in building — Basic soda lime silicate glass products — Part 8: Supplied and final cut sizes
• NS-EN 572-8:2012+A1:2016 Glass in building — Basic soda-lime silicate glass products — Part 8: Supplied and final cut sizes
• DANSK DS/EN 1279-1/AC:2004 Glass in building – Insulating glass units – Part 1: Generalities, dimensional tolerances and rules for the system description
• NS-EN 572-8:2004 Glass in building — Basic soda lime silicate glass products — Part 8: Supplied and final cut sizes
• DIN 28146 E:2018 Draft Document - Glass-lined steel baffles for agitator vessels - Mounting dimensions
• BS 364:1929 Neck and flange dimensions of illumination glassware and carriers
• UNE-EN 572-8:2004 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• BS 539-2:1951 Dimensions of drain fittings scottish type salt-glazed ware and glass (vitreous) enamelled salt-glazed fire clay

GSO, How to measure glass size

• GSO ISO 14548:2013 Photography -- Dimensions of glass plates
• BH GSO ISO 14548:2016 Photography -- Dimensions of glass plates
• OS GSO ISO 12543-5:2012 Glass in building- Laminated glass and laminated safety glass – Part 5: Dimension and edge finishing.
• BH GSO ISO 12543-5:2013 Glass in building- Laminated glass and laminated safety glass – Part 5: Dimension and edge finishing.
• GSO ISO 12543-5:2024 Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
• OS GSO ISO 12821:2015 Glass packaging -- 26 H 180 crown finish -- Dimensions
• GSO ISO 12543-5:2012 Glass in building- Laminated glass and laminated safety glass – Part 5: Dimension and edge finishing.
• GSO OIML R96:2007 Measuring container bottles
• BH GSO ISO 595-1:2015 Reusable all glass or metal and glass syringes for medical use - Part 1: Dimensions
• OS GSO ISO 595-1:2013 Reusable all glass or metal and glass syringes for medical use - Part 1: Dimensions

British Standards Institution (BSI), How to measure glass size

• BS ISO 14548:2021 Photography. Dimensions of glass plates
• BS 5542:1978 Specification for dimensions of test tubes made of glass or plastics for radioactivity measurements
• BS EN 572-8:2004 Glass in building - Basic soda lime silicate glass products - Supplied and final cut sizes
• BS ISO 15039:2003+A1:2015 Textile-glass rovings. Determination of solubility of size
• 21/30432756 DC BS ISO 14548. Photography. Dimensions of glass plates
• BS EN 572-8:2012 Glass in building. Basic soda lime silicate glass products. Supplied and final cut sizes
• BS EN ISO 12543-5:2011 Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
• BS EN ISO 12543-5:2021 Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
• BS ISO 12821:2013 Glass packaging. 26 H 180 crown finish. Dimensions
• BS EN 14798:2005 Glass packaging — Hand-held crown bottle openers — Dimensions
• BS EN 14854:2021 Aerosol containers. Glass containers. Dimensions of the neck finish
• BS EN 14854:2006 Aerosol containers. Glass containers. Dimensions of the neck finish
• BS EN 14854:2005 Aerosol containers — Glass containers — Dimensions of the neck finish
• BS EN 14798:2006 Glass packaging. Hand-held crown bottle openers. Dimensions
• 20/30395497 DC BS EN 14854. Glass packaging. Dimensions of neck finishes for aerosol and spray glass containers
• BS ISO 9100:1995 Wide-mouth glass containers. Vacuum lug finishes. Dimensions
• BS ISO 14368-1:2001 Mineral and sapphire watch-glasses - Dimensions and tolerances
• BS EN ISO 12822:2020 Glass packaging. 26 H 126 crown finish. Dimensions
• BS ISO 12822:2015 Glass packaging. 26 H 126 crown finish. Dimensions
• BS EN 14634:2010 Glass packaging.26 H 180 crown finish.Dimensions
• BS EN 14634:2006 Glass packaging - 26 H 180 crown finish - Dimensions
• BS EN 14635:2006 Glass packaging - 26 H 126 crown finish - Dimensions
• BS EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
• BS EN 1279-1:2004 Glass in building - Insulating glass units - Generalities, dimensional tolerances and rules for the system description
• BS EN 572-8:2012+A1:2016 Glass in building. Basic soda-lime silicate glass products. Supplied and final cut sizes
• 20/30402983 DC BS EN ISO 12543-5. Glass in building. Laminated glass and laminated safety glass. Part 5. Dimensions and edge finishing
• BS EN 17829:2023 Glass packaging — 28 millimetre - screw finishes (MCA range) — Dimensions
• BS 1263-1:1989 Reusable hypodermic syringes for medical use.. Specification for dimensions of all-glass and metal-and-glass syringes

International Organization for Standardization (ISO), How to measure glass size

• ISO 14548:2021 Photography — Dimensions of glass plates
• ISO 14548:1998 Photography - Dimensions of glass plates
• ISO 8163:1985 Glass containers; Shallow crown finishes; Dimensions
• ISO 8162:1985 Glass containers; Tall crown finishes; Dimensions
• ISO 12543-5:2021 Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
• ISO 9056:1990 Glass containers; series of pilferproof finish; dimensions
• ISO 8164:1990 Glass containers; 520 ml Euro-form bottles; dimensions
• ISO 12543-5:1998 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
• ISO 12821:2013 Glass packaging.26 H 180 crown finish.Dimensions
• ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
• ISO 9100:1992 Wide-mouth glass containers; vacuum lug finishes; dimensions
• ISO 12822:2015 Glass packaging - 26 H 126 crown finish - Dimensions
• ISO 12822:2020 Glass packaging — 26 H 126 crown finish — Dimensions
• ISO 12821:2019 Glass packaging — 26 H 180 crown finish — Dimensions
• ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use; Part 1 : Dimensions
• ISO 9057:1991 Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions

Danish Standards Foundation, How to measure glass size

• DS/ISO 14548:2021 Photography – Dimensions of glass plates
• DS/EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
• DS/EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish
• DS/EN 14798:2008 Glass packaging - Hand-held crown bottle openers - Dimensions
• DS/EN 14634:2010 Glass packaging - 26 H 180 crown finish - Dimensions
• DS/EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
• DS/ISO 595-1:1989 Reusable all-glass or metal-and-glass syringes for medical use. Part 1: Dimensions
• DS/EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: Dimensions
• DS/EN 1279-1:2004 Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
• DS/EN 1279-1/AC:2006 Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description

RU-GOST R, How to measure glass size

• GOST 24980-2005 Glass containers. Methods of testing the parameters
• GOST 24980-1981 Glass containers. Method of determination of size, mass, capacity and shape deviation
• GOST 24980-1992 Glass containers. Method of determination parameters
• GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
• GOST 32674-2014 Glass containers. Sizes. Control methods
• GOST 27989-1988 Glass fillers for the domestic vacuum flasks. Types, parameters and sizes
• GOST 5717.2-2003 Glass jars canned food. Basic parameters and dimensions
• GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
• GOST R 50250-1992 Mechanical pencils. Part 1. Glassifications, dimensions, performance requirements and testing
• GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions
• GOST 22060-1976 Subminiature electron glass-type valves and tubes. Basic dimensions
• GOST R 51476-1999 Glass bottles for food liquids. Types, parameters and basic dimensions
• GOST 10117.1-2001 Glass bottles for food liquids. General specifications
• GOST 6943.7-1979 Glass textile products. Methods for determination of linear dimensions, surface and linear density

CZ-CSN, How to measure glass size

• CSN 70 4190-1978 Glass outlet stopcocks. Dimensions
• CSN 70 3008-1988 Glass containers — Shallow crown finis- hes — Dimensions
• CSN 70 3009-1988 Glass containers — Tall crown finishes — Dimensions
• CSN 70 1602-1985 Glass blocks. Types, dimensions and parameters
• CSN 70 2602-1986 Glass products for luminaires. Attaching dimensions
• CSN 13 8901-1982 Basic dimension for glass pipes and fittings
• CSN 25 7912-1987 Cannon-Fenske glass capillary viscosimeters. Dimensions
• CSN 25 7910-1987 Ubbelonde class capillary viscosimeters. Dimension
• CSN 25 7911-1987 Glass papillary viscosimeters for non-transparent liquids. Dimensions
• CSN 70 3002-1993 Finishes with external screw thread for glass containers. Dimensions
• CSN 25 7913-1987 Pinkevitch- glass capillary viscosimeters. Dimension
• CSN 70 3324-1956 glass measuring cylinder
• CSN 69 8042-1984 GRP. Horizontál Pressureless Cylindrical Vesgels. Slzes and Dimensions.
• CSN 70 4082-1996 Laboratory glassware. Analytical funnels. Shape and dimension
• CSN 70 4081-1996 Laboratory glassware. Funnels plain, short stem. Shape and dimensions

German Institute for Standardization, How to measure glass size

• DIN 44807:1979 Dimensions of test tubes made of glass and plastics for radioactivity measurements
• DIN 4242:1979 Glass block walls; construction and dimensioning
• DIN EN 14854:2020 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German and English version prEN 14854:2020
• DIN 8253-4:1992 Round glasses for watches; mineral glasses; I-gasket, dimensions
• DIN EN 14854:2022-01 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German version EN 14854:2021
• DIN EN ISO 12822:2020-08 Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020); German version EN ISO 12822:2020
• DIN EN ISO 12821:2020-02 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019); German version EN ISO 12821:2019
• DIN EN 14798:2006 Glass packaging - Hand-held crown bottle openers - Dimensions; English version of DIN EN 14798:2006
• DIN EN 17829:2022 Glass packaging - 28 millimetre-screw finishes for glass containers (MCA range) - Dimensions; German and English version prEN 17829:2022
• DIN EN ISO 12543-5:2022-03 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021); German version EN ISO 12543-5:2021
• DIN EN ISO 12543-5:2023 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
• DIN EN 14798:2006-01 Glass packaging - Hand-held crown bottle openers - Dimensions; German version EN 14798:2005
• DIN EN ISO 12543-5/A100:2023-05 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021); German version EN ISO 12543-5:2021; Amendment A100 / Note: Date of issue 2023-04-21*Intended as an amendment to DIN EN ISO 12543-...
• DIN 28159:2006 Shaft end for externally coupled glass lined steel agitators - Dimensions
• DIN 28146:2019-05 Glass-lined steel baffles for agitator vessels - Mounting dimensions
• DIN 28146:2019 Glass-lined steel baffles for agitator vessels - Mounting dimensions
• DIN 16870-1:1987 Wound glass fibre reinforced epoxy resin pipes; dimensions
• DIN 12214:1996-12 Laboratory glassware - Glass tube ends and covers with laboratory flat flange - Dimensions, requirements
• DIN EN 14854:2022 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German version EN 14854:2021
• DIN 12214:1996 Laboratory glassware - Glass tube ends and covers with laboratory flat flange - Dimensions, requirements
• DIN EN ISO 12822:2020 Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
• DIN 28152-1:2021 Clamps for glass lined vessels - Part 1: Dimensions, assignment
• DIN 28152-1:2021-09 Clamps for glass lined vessels - Part 1: Dimensions, assignment
• DIN 28159:2006-12 Shaft end for externally coupled glass lined steel agitators - Dimensions
• DIN EN 17829:2023 Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
• DIN 28144:2006 Agitator assembly for two piece glass lined steel agitators - Dimensions
• DIN 168-1:1998 Glass container knuckle thread finishes - Thread sizes
• DIN 16871:1982 Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions
• DIN 8253-4:1992-03 Round glasses for watches; mineral glasses; I-gasket, dimensions
• DIN 52242:1996 Testing of glass and raw materials for the production of glass - Determination of chloride content
• DIN 16185:1991 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
• DIN EN 1279-1:2004 Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description; German version EN 1279-1:2004
• DIN EN 572-8:2016-06 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes; German version EN 572-8:2012+A1:2016
• DIN 16189:1991 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges

RO-ASRO, How to measure glass size

• STAS 2861-1985 Glass packings NORMAL GLASS BOTTLE, 1000 ml CAPAC ITY Shapc and dimensions
• STAS 4291-1980 GLASS BOTTLES FOR MILK Shape and dimensions
• STAS 10001/3-1975 SAFETY GLASSES FOR SHIPS WINDOWS Dimensions
• STAS 10001/2-1985 SAFETY GLASSES FOR SHIPS SIDE SCUTTLES Dimensions
• STAS 5670-1990 Glass packages BEER BOT?LES Shapes and dimensions
• STAS 10640-1991 Glass packages. Bottles for beverages. Shapes and dimensions
• STAS 10001/2-1975 SAFETY GLASSES FOR SIIIPS'SIDE SCUTTLES Dimensions
• STAS 10328-1975 Glass bottles CHAMPAGNE BOTTLE Shape and dimensions
• STAS 5071-1993 Laboratory glassware. Simple funnels. Dimensions
• STAS 2863/2-1980 GLASS PRESSED PARTS FOR BUILDING PURPOSES Shapes and diraensions
• STAS 3607-1972 Heating installations GLAZED TILE STOVES AND CHIMNEYS Diraensions
• STAS SR ISO 9100:1996 Wide - mouth glass containers - Vacuum lug finishes - Oimensions
• STAS 3249-1991 Glass packages. Glass bottles for soda water. Shapes and dimensions
• STAS 10192-1990 Glass packages RHE IN TYPE BOTTLES Shape and dimensions
• STAS 10315-1982 Glass bottles NAVILLE TYPE BOTTLES Shape and dimensions
• STAS 10193-1990 Glass packages. Bordeaux type bottles. Shape and dimensions
• STAS 5550/3-1971 Laboratory glasware BURETTE WITHOUT STOPCOCK Dimensions
• STAS SR 3448-1993 Laboratory glassware. Cylindrical beakers. Dimensions
• STAS 6337-1974 Glass bottles with cork closure BOTTLE MOUTH Dimensions
• STAS 4731-1986 Laburutorv glassware AI.I.IIIX CONDKNSER Shapes anii dimensions
• STAS 2636-1979 GLASS BELLS AND LAMP SHADES FOR ELECTRIC FITTINGS Coupling dimensions
• STAS 9364/3-1991 Road vehicles WINDSCREEN WIPER BLADES Shapes and dimension.1:
• STAS 2639-1984 MEA SUR IX G GLASS JARS AND GIPS General tcchnical requirements for quality
• STAS 4887-1986 Glass packages Bottles for enclosing by capsule MOUTH OF BOTTLE Shapes and dimen&ions
• STAS 5239-1982 Laboratory glassware VALVES FOR DESICCATORS Shape and dimensions
• STAS 4730-1986 Laboratory glassware LIEB1G CONDKNSER Shapes and dimensions
• STAS 10182-1982 Glass bottles for threaded cap clousure BOTTLE MOUTH Shape and dimensions
• STAS 5550/4-1989 Laborntory glasswsue BT'RKTTIi WITH STRAICIIT COCK Shapc pud dimensions

Association Francaise de Normalisation, How to measure glass size

• NF H35-085:1991 Bottling industry. Glass bottles. Neck glass container finish 29 mm 185. Dimensions.
• NF H35-082:1991 Bottling industry. Glass flash. Tolerances on capacities and dimensions.
• NF S90-091:1983 Pharmaceutical ampoules. Dimensions of glass tubes.
• NF P78-201-4:2006 Building works - Glazing and mirror glass work - Part 4 : calculation guide for the dimensioning of glazing.
• NF H35-098:1991 Bottling industry. Glass bottles. Flat glass finish with 29 mm groove. Dimensions.
• NF EN ISO 12821:2019 Emballage en verre - Bague couronne 26 H 180 - Dimensions
• NF EN ISO 12822:2020 Emballages en verre - Bague couronne 26 H 126 - Dimensions
• NF EN ISO 12543-5:2021 Glass in construction - Laminated glass and laminated safety glass - Part 5: dimensions and edge shaping
• NF P78-211-5*NF EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5 : dimensions and edge finishing
• NF EN 14854:2021 Emballage en verre - Dimensions des bagues des flacons en verre pour générateurs d'aérosols et pulvérisateurs
• NF H44-052*NF EN 14854:2021 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
• NF H35-080:1991 Bottling industry. Glass bottles. Glass low turn-off crown finish 26 mm. Dimensions.
• NF P78-211-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5 : dimensions and edge finishing.
• NF H35-043*NF EN ISO 12821:2019 Glass packaging - 26 H 180 crown finish - Dimensions
• NF H44-052:2006 Aerosol containers - Glass containers - Dimensions of the neck finish.
• NF H35-103:1993 Bottling industry. Glass bottles. Glass screw finishes for non carbonated products so-called "bvp". Dimensions.
• NF H35-077:2007 Bottling industry - Glass bottles - Dimensional relationships and tolerances.
• NF EN 17829:2023 Glass packaging - 28 millimeter screw rings (MCA rings) - Dimensions
• NF B40-106:1973 Refractory products - Dimensions of stacking bricks for glassmaking furnace
• NF S86-400:1994 Horlogery. Watch-glasses. Dimensions and tolerances of watch-glasses and test methods for their verification.
• NF H44-010:1986 Aerosols dispensers. Glass containers. Dimensions of finish 20 mm.
• NF H44-032:1986 Aerosols dispensers. Glass containers. Dimensions of finish 17 mm.
• NF H35-043:1996 Bottling industry. Glass bottles. 26 H 180 crown finish. Dimensions.
• NF H44-009:1986 Aerosols dispensers. Glass containers. Dimensions of finish 18 mm.
• NF H35-044:1996 Bottling industry. Glass bottles. 26 H 126 crown finish. Dimensions.
• NF B38-105:1980 Glass fibre - Determination of linear density of glass fibre and filament yarns forming a textile sample of reduced dimensions
• NF H44-034:1986 Aerosols dispensers. Glass containers. Dimensions of finish 11 mm.
• NF H44-033:1986 Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.
• NF EN 14849:2006 Aerosol containers - Glass containers - Aerosol valve ring dimensions
• NF H35-044:2010 Glass packaging - 26 H 126 crown finish - Dimensions.
• NF P78-215:1998 Glass in building. Laminated glass and laminated safety glass. Part 5 : dimensions and edge finishing.
• NF H35-043:2015 Glass packaging - 26 H 180 crown finish - Dimensions
• NF H35-043:2010 Glass packaging - 26 H 180 crown finish - Dimensions.
• NF H35-077:1977 Bottling industry - Glass bottle - Dimensional relationships and tolerances.
• NF H44-008:1986 Aerosols dispensers. Glass containers. Dimensions of finish 15 mm.
• NF H35-028:1995 Bottling industry. Glass bottles. Glass champagne finish. Dimensions.
• NF P78-471:2005 Glass in building - Insulating glass units - Part 1: generalities and dimensional tolerances and rules for the system description.
• NF P78-102-8/IN1*NF EN 572-8/IN1:2016 Glass in building - Basic soda lime silicate glass products - Part 8 : supplied and final cut sizes
• NF P78-102-8*NF EN 572-8+A1:2016 Glass in building - Basic soda lime silicate glass products - Part 8 : supplied and final cut sizes

工業和信息化部, How to measure glass size

• HG/T 2637-2017 Method for detecting geometric dimensions of glass-lined parts

Standard Association of Australia （SAA）, How to measure glass size

• AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass
• AS 1679.1:2005 Reusable all-glass or metal-and-glass syringes for medical use - Dimensions

Korean Agency for Technology and Standards (KATS), How to measure glass size

• KS M ISO 1517-2002(2007) Paints and varnishes－Surface-drying test－Ballotini method
• KS L 2302-2012 Shape and dimension of glass apparatus for chemical analysis
• KS L 2302-1987 Shape and dimension of glass apparatus for chemical analysis
• KS P ISO 595-1-2018 Reusable all-glass or metal-and-glass syringes for medical use－Part 1：Dimensions
• KS C 8005-2003 GLASS WARE FOR LIGHTING FITTING'S (DIMENSIONS FOR FITTED PORTIONS)
• KS L 2302-2022 Shape and dimension of glass apparatus for chemical analysis
• KS C 8005-1972(1999) GLASS WARE FOR LIGHTING FITTING'S (DIMENSIONS FOR FITTED PORTIONS)
• KS L 2302-2017(2022) Shape and dimension of glass apparatus for chemical analysis
• KS P ISO 595-1:2008 Reusable all-glass or metal-and-glass syringes for medical use－Part 1：Dimensions
• KS P ISO 595-1-2008(2013) Reusable all-glass or metal-and-glass syringes for medical use－Part 1：Dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure glass size

• GB/T 4870-1985 sheet glass dimension series
• GB/T 17449-1998 Packaging--Glass containers--Thread finish dimensions
• GB/T 32641-2016 Standard size for flat panel display glass substrates
• GB/T 17340-1998 Road vehicles--Safety glasses--Dimensions, shapes and appearances

Professional Standard - Agriculture, How to measure glass size

• GB 10809-1989 Glass container crown neck size

European Committee for Standardization (CEN), How to measure glass size

• EN 572-8:2012 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
• EN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
• EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
• EN 14854:2005 Aerosol containers - Glass containers - Dimensions of the neck finish
• EN 14854:2021 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
• EN 14798:2005 Glass packaging - Hand-held crown bottle openers - Dimensions
• FprEN ISO 12543-5:2021 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO/FDIS 12543-5:2021)
• EN ISO 12821:2019 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
• EN ISO 12543-5:1998 Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing ISO 12543-5:1998
• EN 14634:2010 Glass packaging - 26 H 180 crown finish - Dimensions
• EN ISO 12822:2020 Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
• EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
• EN 17829:2023 Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
• EN 1279-1:2004 Glass in Building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
• EN 1279-1:2018 Glass in Building - Insulating glass units - Part 1: Generalities@ system description@ rules for substitution@ tolerances and visual quality
• EN ISO 12821:2015 Glass packaging - 26 H 180 crown finish - Dimensions

SE-SIS, How to measure glass size

• SIS 22 44 09-1970 Sealed insulating glass units. Dimensions
• SIS SS IEC 583:1983 Nuclear instrumentation - Test tubes made of glass or plastics for radioactivity measurements - Dimensions
• SIS SEN 31 05 21-1965 Glassware for lighting fittings Dimensions for adaption
• SIS SS 22 41 37-1985 Textile glass - Glass mats - Determination of mass per unit area

Professional Standard - Light Industry, How to measure glass size

• QB/T 3729-1999 Glass containers.Crown finishes dimensions
• QB/T 2315-1997 Watch case round glass size series
• QB/T 3737.1-1999 Glass lampshade for civil use and building calibre size
• QB/T 3737.2-1999 Glass lampshade for civil use and building calibre size of base frame

PT-IPQ, How to measure glass size

• NP 3315-1988 Packing glass Normal manufacture glass bottles. Dimensional relationship and tolerances
• NP 3549-1988 Glass packaging. Ordinary glass bottles, relevant size requirements

CEN - European Committee for Standardization, How to measure glass size

• EN 572-8:2004 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• EN 14635:2004 Glass packaging - 26 H 126 crown finish - Dimensions
• EN 14634:2004 Glass packaging - 26 H 180 crown finish - Dimensions

ES-UNE, How to measure glass size

• UNE-EN 14854:2022 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
• UNE-EN ISO 12543-5:2022 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2021)
• UNE-EN ISO 12821:2020 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
• UNE-EN ISO 12822:2020 Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020).
• UNE-EN 17829:2024 Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
• UNE-EN 572-8:2013+A1:2016 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

ES-AENOR, How to measure glass size

• UNE 92-209-1989 Fiberglass products. Determination of size

國家市場監督管理總局、中國國家標準化管理委員會, How to measure glass size

• GB/T 37855-2019 Glass containers—Dimensions for 26H126 crown finish
• GB/T 37856-2019 Glass containers—Dimensions for 26H180 crown finish

未注明發布機構, How to measure glass size

• DIN 4242:1967 Glass block walls; construction and dimensioning
• DIN EN ISO 12543-5:1998 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing
• DIN EN 572-8:2004 Glass in construction – Basic products made from soda lime silicate glass – Part 8: Delivery dimensions and fixed dimensions
• DIN EN ISO 12543-5 E:2020-02 Architectural glass Laminated glass and laminated safety glass Part 5: Dimensions and edge treatments (draft)
• DIN EN ISO 12822 E:2018-09 Glass Package 26 H 126 Crown Finish Dimensions (Draft)

TR-TSE, How to measure glass size

• TS 3258-1978 SHAPES AND DIMENSIONS OF GLASS CONTAINER FINISHES

VN-TCVN, How to measure glass size

• TCVN 7364-5-2004 Glass in building.Laminated glass and laminated safety glass.Part 5: Dimensions and adge finishing
• TCVN 1050-1971 Testing glasswares.Grinding cones of tapping angle 1:10.Dimension of the grinding part
• TCVN 1069-1971 Glass packages bottles for alcohol "Lua moi".Basic form and dimensions

AR-IRAM, How to measure glass size

• IRAM 6017-1963 Dimensions of plastic screw caps for glasses

Professional Standard-Packaging, How to measure glass size

• BB/T 0071-2017 Packaging glass container cassette bottle size

IN-BIS, How to measure glass size

• IS 10133-1982 Specifications for Glass Bottles—Dimensional Relationships and Tolerances
• IS 7511 Pt.5-1986 Bottleneck Finish Dimensions Part 5 VIAL GOLD1E SEAL Glass Finish

IT-UNI, How to measure glass size

• UNI 7143-1972 Flat glass. Glass thickness for glazing to relation to their dimensions, wind loads and snow loads.
• EC 1-2020 UNI EN ISO 12822:2020 Glass packaging - 26 H 126 crown finish - Dimensions
• UNI 6255-1968 Forged glass vials for pharmaceutical use. Dimensions and deviations

AT-ON, How to measure glass size

• OENORM EN 14854-2020 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
• ONORM F 3091-1981 Non-automatic fire push buttons; glass-panes; dimensions and requirements
• ONORM B 3722-1999 Sealing of glazings with sealants - Rebates - Definitions, requirements, dimensions
• ONORM DIN 19263-1994 pH measurement. Glass electrodes

Lithuanian Standards Office , How to measure glass size

• LST EN 14854-2006 Aerosol containers - Glass containers - Dimensions of the neck finish
• LST EN 14635-2010 Glass packaging - 26 H 126 crown finish - Dimensions
• LST EN 14634-2010 Glass packaging - 26 H 180 crown finish - Dimensions
• LST EN 14798-2005 Glass packaging - Hand-held crown bottle openers - Dimensions
• LST EN ISO 12543-5:2011 Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)

DIN, How to measure glass size

• DIN EN 14634:2005 Glass packaging - 26 H 180 crown finish - Dimensions
• DIN EN 14635:2005 Glass packaging - 26 H 126 crown finish - Dimensions
• DIN EN ISO 12821:2020 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)

Taiwan Provincial Standard of the People's Republic of China, How to measure glass size

• CNS 9115-1994 Glass Ware for Lighting Fittings (Dimensions for Fitted Portions)

IPC - Association Connecting Electronics Industries, How to measure glass size

• IPC TM-650 2.4.39A-1986 Dimensional Stability@ Glass Reinforced Thin Laminates

HU-MSZT, How to measure glass size

• MSZ KGST 1451-1978 Access dimensions of optical glass filaments for medical devices

Group Standards of the People's Republic of China, How to measure glass size

• T/CECS 962-2021 Technical specification for the application of super-large glass curtain wall

American Society for Testing and Materials (ASTM), How to measure glass size

• ASTM D3567-17(2022) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
• ASTM D3567-17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

冶金工業部, How to measure glass size

• YB 4017-1991 Shapes and dimensions of refractory silica bricks for glass melting furnaces

Professional Standard - Ferrous Metallurgy, How to measure glass size

• YB/T 4017-1991 Shapes and sizes of refractory products for glass melting kilns Silicon bricks

PL-PKN, How to measure glass size

• PN E06312-1989 Glass globes for luminaires Dimensions of parts connecting globe with luminaire
• PN O79040-1965 Transport packages Hampers ?or glass carboys Series of dimensions

VDI - Verein Deutscher Ingenieure, How to measure glass size

• VDI 2013 Blatt 1-1970 Dimensioning of GFK (glass-fibre reinforced plastics) construction components

Society of Automotive Engineers (SAE), How to measure glass size

• SAE J1173-1988 Size Classification and Characteristics of Glass Beads for peening

Professional Standard - Automobile, How to measure glass size

• QC/T 46-1992 Type and size of windshield electric wiper
• QC/T 45-1992 Type and size of windshield windshield pneumatic wiper

SAE - SAE International, How to measure glass size

• SAE J1173-2019 SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING
• SAE J1173-1977 SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

Instrument Society of America (ISA), How to measure glass size

• ISA RP16.1,2,3-1959 Terminology, Dimensions and Safety Practices for Indicating Variable Area Meters (Rotameters) RP16.1 Glass Tube; RP16.2 Metal Tube; RP16.3 Extension Type Glass Tube

ISA - International Society of Automation, How to measure glass size

• ISA RP16.1@2@3-1959 Terminology@ Dimensions and Safety Practices for Indicating Variable Area Meters (Rotameters) RP16.1 Glass Tube; RP16.2 Metal Tube; RP16.3 Extension Type Glass Tube

Professional Standard - Machinery, How to measure glass size

• JB/T 9263.1-1999 The types and fundamental sizes of enclosed-scale industrial thermometers
• JB/T 9341.3-1999 Metrology grating technology.Technical requirements for grating bar of glass

Japanese Industrial Standards Committee (JISC), How to measure glass size

• JIS C 8101:1965 Glassware for lighting fittings (dimensions for fitted portions)

NO-SN, How to measure glass size

• NS 6125-1986 Plastic pipes - Pipes of glass fibre reinforced polyester (GRP) - Dimensions - For marine use

Others:   How to measure glass size, How to measure grain size, How to measure three-dimensional size, How to measure product size, How to measure particle size.