National Measurements of Geometric Dimensions

National Measurements of Geometric Dimensions, Total:271 items.

In the international standard classification, National Measurements of Geometric Dimensions involves: Fibre optic communications, Electrical wires and cables, Linear and angular measurements, Equipment for the chemical industry, Surface treatment and coating, Iron and steel products, Products of non-ferrous metals, Non-ferrous metals, Testing of metals, Tyres, Technical drawings, Jewellery, Vocabularies, Fasteners, Commercial vehicles, Road engineering, Medical equipment, Fluid storage devices, Solar energy engineering.

HU-MSZT, National Measurements of Geometric Dimensions

MNOSZ 2795-1956 Auger geometry measurement

RO-ASRO, National Measurements of Geometric Dimensions

STAS 738-1960 Geometric dimensions. Unit of measure
STAS R 7042-1981 STEEL REAMERS Geometric parameters for cutting parts

American National Standards Institute （ANSI), National Measurements of Geometric Dimensions

ANSI/EIA 455-55A:1986 Coating Geometry of Optical Fibers, Methods for Measuring the
ANSI/EIA/TIA 455-173:1990 Coating Geometry Measurement for Optical Fiber Side View Method
ANSI/TIA-455-219-2002 FITP219 Multifiber Ferrule Endface Geometry Measurement
ANSI/TIA/EIA 455-176-A-2003 Method of Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis
BS EN ISO 3611:2023 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements

German Institute for Standardization, National Measurements of Geometric Dimensions

DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
DIN EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); English version of DIN EN ISO 8062-3:2007
DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
DIN EN ISO 22081:2019 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
DIN 2239:2006-12 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
DIN EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ？ tolerances for indicated dimensions (ISO 8062-3...
DIN EN ISO 8062-3:2008 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN EN ISO 8062-3:2019 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019); German and English version prEN ISO 8
DIN 32876-1 Bb.1:1999 Verification of geometrical parameters - Electrical linear measurement - General comments and application, examples
DIN EN ISO 8062-1:2008 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
DIN EN ISO 1938-2:2017-05 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017
DIN EN ISO 13385-1:2020-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019
DIN 2239:2006 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
DIN EN ISO 1:2022-10 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022); German version EN ISO 1:2022
DIN EN ISO 14405-1:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
DIN EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version EN ISO 3040:2012
DIN V VDE V 0126-18-2-1:2007 Solar wafers - Part 2-1: Measuring the geometric dimensions of silicon wafers - Wafer thickness
DIN CEN ISO/TS 8062-2:2014-03*DIN SPEC 91184:2014-03 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013
DIN EN ISO 3040:2016-12 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016); German version EN ISO 3040:2016
DIN EN ISO 8062-1:2008-01 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007

RU-GOST R, National Measurements of Geometric Dimensions

GOST 15634.0-1970 Magnet wire. Test procedure for the dimensions and increase in dimensions due to the covering measuring
GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
GOST R 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measure. Geometrical shapes, linear size and manufacturing material requirements
GOST 32825-2014 Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages
GOST R 8.628-2007 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection

International Organization for Standardization (ISO), National Measurements of Geometric Dimensions

ISO 8062-3:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
ISO 8062-3:2007/cor 1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings; Technical Corrigendum 1
ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
ISO 3611:2023 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-2:2018 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO/CD 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
ISO 13385-1:2019 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
ISO 13385-2:2020 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges

Association Francaise de Normalisation, National Measurements of Geometric Dimensions

XP E10-100-2:2018 Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
NF A00-510-3*NF EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings.
NF E04-574:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
NF EN ISO 22081:2021 Geometric Product Specification (GPS) - Geometric Tolerancing - General Geometric Specifications and General Size Specifications
NF E02-200-1*NF EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
NF E11-091:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers
NF E10-100-1:2021 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement
NF EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: reference disks for gauges
NF A00-510-1*NF EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary
NF EN ISO 1938-1:2015 Geometrical Product Specification (GPS) - Dimensional measuring equipment - Part 1: Smooth gauges with linear size limits
NF E11-106*NF EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics
NF E10-100-1:2002 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement.
NF E02-200-2*NF EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
NF E10-000*NF EN ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
NF E04-563-3*NF EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
NF E11-085-1*NF EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF E11-015:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
NF EN ISO 14405-1:2016 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1 : tailles linéaires
NF EN ISO 14405-3:2017 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 3 : tailles angulaires
NF S94-469:2004 Surgical instruments - Vocabulary - Shapes and geometries.
NF EN ISO 1:2022 Geometrical Product Specification (GPS) - Normal reference temperature for specifying geometric and dimensional properties
NF E86-040:1985 Not pressurized tanks. Geometrical and dimensional tolerances.
NF EN ISO 3611:2023 Geometrical Product Specification (GPS) - Dimensional Measuring Equipment - Design Features and Metrological Characteristics of Outdoor Micrometers
NF E11-085-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics.
NF EN ISO 13225:2012 Geometrical Product Specification (GPS) - Dimensional measuring equipment - Vertical measurers - Design features and metrological characteristics
NF ISO 21391:2019 Criticality safety - Geometric dimensions to guarantee subcriticality - Equipment dimensions and installation dimensions
NF E11-092*NF EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : Micrometers for external measurements - Design and metrological characteristics.
NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
NF EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: design features and metrological characteristics of calipers
NF E02-352:1999 Geometrical product specifications (GPS). Cutted and bended workpieces. Dimensional and geometrical tolerances for dimensions and features without individual tolerances.

European Committee for Standardization (CEN), National Measurements of Geometric Dimensions

EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023
EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
EN ISO 1:2022 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
FprEN ISO 3611 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO/FDIS 3611:2023)
EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)

British Standards Institution (BSI), National Measurements of Geometric Dimensions

BS EN ISO 22081:2021 Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size
BS EN ISO 8062-3:2023 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
BS EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers
19/30369878 DC BS EN ISO 22081. Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical and dimensional specifications
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
BS EN ISO 14405-1:2016 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 3611:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Micrometers for external measurements — Design and metrological characteristics
BS EN ISO 8062-1:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Vocabulary
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
19/30395140 DC BS EN ISO 8062-3. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Part 3. General dimensional and geometrical tolerances and machining allowances for castings
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of calliper depth gauges
BS EN ISO 13225:2012(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment ; Height gauges — Design and metrological characteristics
BS EN ISO 14405-2:2019 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear or angular sizes
BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 3611:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
24/30463912 DC Geometrical product specifications (GPS) — Dimensional tolerancing - Part 1: Linear sizes
BS EN ISO 1:2022 Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
BS EN ISO 1:2016 Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
22/30398242 DC BS ISO 3611. Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics

Professional Standard - Aviation, National Measurements of Geometric Dimensions

HB 6154-1988 Aircraft cockpit geometry

工業和信息化部, National Measurements of Geometric Dimensions

HG/T 2637-2017 Method for detecting geometric dimensions of glass-lined parts
SJ/T 11630-2016 Test method for geometric dimensions of silicon wafers for solar cells

Professional Standard - Chemical Industry, National Measurements of Geometric Dimensions

HG/T 2637-2007 Detecting methods of geometry dimension for glass-lined parts
HG/T 2637-1994 Method for detecting geometric dimensions of glass-lined parts
HG/T 2637-2011 Method for detecting geometric dimensions of glass-lined parts
HG/T 2637~2638-2017 Inspection method of geometric dimensions of glass-lined parts and quality classification of glass-lined equipment (2017)

SCC, National Measurements of Geometric Dimensions

DANSK DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DANSK DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
DANSK DS/ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
DANSK DS/EN ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
NS-EN ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
DIN EN ISO 22081 E:2019 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
NS-EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
DANSK DS/EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
AENOR UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for molded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
DANSK DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
NS-EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
BS PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts-Rules
NS-EN ISO 3611:2010 Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics (ISO 3611:2010)
DANSK DS/ISO 13385-1:2019 Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 1: Design and metrological characteristics of callipers
DANSK DS/EN ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
DANSK DS/EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
DANSK DS/EN ISO 1:2016 Geometrical product specifications (GPS) – Standard reference temperature for the specification of geometrical and dimensional properties
NS-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
ASME Y14.5.2-1995 Certification of Geometric Dimensioning and Tolerancing Professionals
DANSK DS/ISO 1:2022 Geometrical product specifications (GPS) – Standard reference temperature for the specification of geometrical and dimensional properties
DANSK DS/ISO 3611:2023 Geometrical product specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of micrometers for external measurements
NS-EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
DANSK DS/EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
08/30180227 DC BS EN ISO 3611. Geometrical product specifications (GPS). Dimensional measuring instruments. Micrometers for external measurements. Design and metrological characteristics
11/30231340 DC BS EN ISO 1938-1. Geometrical product specifications (GPS). Dimensional measuring equipment. Part 1. Plain limit gauges of linear size
AENOR UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
DANSK DS/ISO 13385-2:2020 Geometrical product specifications (GPS) – Dimensional measuring equipment – Part 2: Design and metrological characteristics of calliper depth gauges
NS-EN ISO 13225:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics (ISO 13225:2012)
DIN EN ISO 14405 E:2006 Draft Document - Geometrical Product Specification (GPS) - Dimensional Tolerancing - Linear Sizes (ISO/DIS 14405:2006); German version prEN ISO 14405:2006
DIN EN ISO 1938-1 E:2011 Draft Document - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO/DIS 1938-1:2011); German version prEN ISO 1938-1:2011

GSO, National Measurements of Geometric Dimensions

BH GSO ISO 8062-3:2022 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
BH GSO ISO 22081:2023 Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
GSO ISO 8062-3:2021 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
GSO ISO 22081:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
BH GSO ISO 1938-1:2022 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
GSO ISO 1938-1:2021 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
GSO ISO 3611:2017 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics
BH GSO ISO 3611:2017 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics
BH GSO ISO 1938-2:2022 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
GSO ISO 13225:2013 Geometrical product specifications (GPS) -- Dimensional measuring equipment; Height gauges -- Design and metrological characteristics
OS GSO ISO 13225:2013 Geometrical product specifications (GPS) -- Dimensional measuring equipment; Height gauges -- Design and metrological characteristics
GSO ISO 1938-2:2021 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
GSO ISO 1:2021 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
BH GSO ISO 14405-3:2022 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
BH GSO ISO 13385-1:2023 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
GSO ISO 13385-1:2022 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
BH GSO ISO 14405-1:2017 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
BH GSO ISO 1:2022 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
GSO ISO 14405-3:2021 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
OS GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
GSO ISO 1:2024 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
BH GSO ISO 14405-2:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
OS GSO ISO/TS 8062-2:2015 Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules
OS GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
GSO ISO 13102:2015 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Electronic digital-indicator gauge -- Design and metrological characteristics
GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones

Danish Standards Foundation, National Measurements of Geometric Dimensions

DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
DS/EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
DS/EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
DS/EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
DS/EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
DS/EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
DS/EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics
DS/EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
DS/EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
DS/CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, National Measurements of Geometric Dimensions

GB/T 15077-2008 Geometric size measuring methods of precious metals and their alloy materials
GB/T 15077-1994 Geometric size measuring methods of precious metals and their alloy materials
GB/T 6414-2017 Castings.Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 42124.1-2022 Geometrical product specifications (GPS)—Dimensional and geometrical tolerances for moulded parts—Part 1:Vocabulary

Society of Automotive Engineers (SAE), National Measurements of Geometric Dimensions

SAE J2717-2006 Tests to Define Tire Size (Geometry), Mass, and Inertias
SAE J2717-2012 Tests to Define Tire Size (Geometry), Mass, and Inertias
SAE J2370-2003 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2021 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2009 Geometric Dimensions and Tolerancing for Curved Hose

SAE - SAE International, National Measurements of Geometric Dimensions

SAE J2717-2018 Tests to Define Tire Size (Geometry)@ Mass@ Inertias
SAE J2370-2001 Geometric Dimensions and Tolerancing for Curved Hose

KR-KS, National Measurements of Geometric Dimensions

KS B ISO 1938-1-2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 14405-1-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 3040-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones

Korean Agency for Technology and Standards (KATS), National Measurements of Geometric Dimensions

KS B ISO 1938-1:2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 13385-1-2019 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 14405-1:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 13385-1:2014 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 14405-2:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 8062-1-2014(2019) Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
KS B ISO 3040:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 463-2014(2019) Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
KS B ISO 13385-1-2014(2019) Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics

Military Standard of the People's Republic of China-General Armament Department, National Measurements of Geometric Dimensions

GJB 35A-1993 Fighter cockpit geometric dimensions
GJB 35B-2008 Aircrew station geometry for fighter and attacker
GJB 19B-2007 Aircrew seat geometry for fighter and attacker
GJB 1471-1992 Military helicopter cockpit geometric dimensions
GJB 19A-1998 Basic geometric dimensions of fighter seats

IT-UNI, National Measurements of Geometric Dimensions

UNI EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications

CZ-CSN, National Measurements of Geometric Dimensions

CSN OPT 73 6360-1966 Geometrical arrangement of normal gauge track for the state railways and sidings

ES-UNE, National Measurements of Geometric Dimensions

UNE-EN ISO 22081:2023 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
UNE-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
UNE-EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:...
UNE-EN ISO 1938-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
UNE-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Espa?ola de Normalización in May of 2020.)
UNE-EN ISO 1:2022 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Espa?ola de Normalización in August of 2022.)
UNE-EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Espa?ola de Normalización in August of 2020.)
UNE-CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)

Lithuanian Standards Office , National Measurements of Geometric Dimensions

LST EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
LST EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
LST EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
LST EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)

Professional Standard - Light Industry, National Measurements of Geometric Dimensions

QB/T 4888-2015 Geometric size measuring methods of precious metal jewellery and accessory

未注明發布機構, National Measurements of Geometric Dimensions

DIN 2239:1989 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
GJB 1471A-2012 Military helicopter cockpit geometric dimensions
DIN EN ISO 14405-2 E:2018-09 Technical Product Specification (GPS) Dimensional Tolerances Part 2: Dimensions other than Linear Dimensions (Draft)
DIN EN ISO 1938-1 E:2011-08 Geometric Product Specification (GPS) Dimensional Measuring Equipment Part 1: Planar Limit Gauges for Linear Dimensions (Draft)

DIN, National Measurements of Geometric Dimensions

DIN EN ISO 22081:2022 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)

AENOR, National Measurements of Geometric Dimensions

UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)

AT-ON, National Measurements of Geometric Dimensions

OENORM EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)

PL-PKN, National Measurements of Geometric Dimensions

PN-EN ISO 22081-2021-07 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- General geometrical specifications and general size specifications (ISO 22081:2021)

Japanese Industrial Standards Committee (JISC), National Measurements of Geometric Dimensions

JIS B 7507:2022 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital callipers
JIS B 7518:2023 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital calliper depth gauges
JIS B 0680:2023 Geometrical product specifications (GPS) -- Standard reference temperature for the specification of geometrical and dimensional properties

Professional Standard - Machinery, National Measurements of Geometric Dimensions

JB/T 9151.5-1999 Mehtod of verification for fastenes.Size and geometry.Pins
JB/T 9151.6-1999 Mehtod of verification for fastenes.Size and geometry.Rivets
JB/T 9151.4-1999 Mehtod of verification for fastenes.Size and geometry.Washers
JB/T 9151.7-1999 Mehtod of verification for fastenes.Size and geometry.Rings
JB/T 9151.2-1999 Mehtod of verification for fastenes.Size and geometry.Wood screws
JB/T 9151.3-1999 Mehtod of verification for fastenes.Size and geometry.Tapping screws

Sichuan Provincial Standard of the People's Republic of China, National Measurements of Geometric Dimensions

DB51/T 1555-2012 Dimensional and geometric tolerance measurement methods for tooling for nuclear fuel assemblies

Standard Association of Australia （SAA）, National Measurements of Geometric Dimensions

AS 4826.1:2001 Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment

CEN - European Committee for Standardization, National Measurements of Geometric Dimensions

EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes

U.S. Air Force, National Measurements of Geometric Dimensions

AIR FORCE A-A-59882 A-2011 GEOMETRY MEASURING MACHINE

中華人民共和國國家質量監督檢驗檢疫總局、中國國家標準化管理委員會, National Measurements of Geometric Dimensions

GB/T 34634-2017 Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument

國家市場監督管理總局、中國國家標準化管理委員會, National Measurements of Geometric Dimensions

GB/T 38762.1-2020 Geometrical product specifications (GPS)—Dimensional tolerancing—Part 1: Linear sizes
GB/T 40742.4-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone

熟妇人妻一区二区三区四区,久久ER99热精品一区二区,真实的国产乱XXXX在线,性XXXX18精品A片一区二区