ZH
KR
JP
ES
RU
DEStandard Dose Laboratory
Standard Dose Laboratory, Total:418 items.
In the international standard classification, Standard Dose Laboratory involves: Laboratory medicine, Radiation measurements, Geology. Meteorology. Hydrology, Analytical chemistry, Measurement of volume, mass, density, viscosity, Petroleum products in general, Lubricants, industrial oils and related products, Quality, Energy and heat transfer engineering in general, Metrology and measurement in general, Sterilization and disinfection, Installations in buildings, Construction materials, Adhesives, Acoustics and acoustic measurements, Textile fibres, Medical sciences and health care facilities in general, Glass, Thermodynamics and temperature measurements, Test conditions and procedures in general, Products of the textile industry, Lighting, Applications of information technology, Protection against fire, Corrosion of metals, Information technology (IT) in general, Soil quality. Pedology, Products of the chemical industry, Standardization. General rules, Audio, video and audiovisual engineering, Refractories, Electrical wires and cables, Optics and optical measurements, Radiation protection, Equipment for petroleum and natural gas industries, Road engineering, Equipment for the rubber and plastics industries, Earthworks. Excavations. Foundation construction. Underground works, Rubber, Water quality, Environmental protection, Coals, Microbiology, Waxes, bituminous materials and other petroleum products, Biology. Botany. Zoology, Pipeline components and pipelines, Fertilizers, Pharmaceutics.
International Organization for Standardization (ISO), Standard Dose Laboratory
- ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
- ISO/ASTM 51400:2002 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
- ISO/ASTM 51400:2003 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
- ISO 9142:1990 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO 1146:1988 Pyrometric reference cones for laboratory use; specification
- ISO 15560:1998 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
- ISO 19238:2004 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- ISO 19238:2014 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
- ISO 1042:1981 Title missing - Legacy paper document
- ISO 648:1977 Laboratory glassware; One-mark pipettes
- ISO 1042:1998 Laboratory glassware - One-mark volumetric flasks
- ISO 1042:1975 Title missing - Legacy paper document
Korean Agency for Technology and Standards (KATS), Standard Dose Laboratory
American Society for Testing and Materials (ASTM), Standard Dose Laboratory
- ASTM ISO/ASTM51400-02 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
- ASTM ISO/ASTM 51400-02 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
- ASTM E542-01(2021) Standard Practice for Calibration of Laboratory Volumetric Apparatus
- ASTM E1272-02(2007) Standard Specification for Laboratory Glass Graduated Cylinders
- ASTM E1272-95(1999) Standard Specification for Laboratory Glass Graduated Cylinders
- ASTM E1272-02(2019) Standard Specification for Laboratory Glass Graduated Cylinders
- ASTM E617-18 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM E542-22 Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments
- ASTM E617-23 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM D6792-06 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-03 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM E288-10 Standard Specification for Laboratory Glass Volumetric Flasks
- ASTM E288-06 Standard Specification for Laboratory Glass Volumetric Flasks
- ASTM D6512-07(2014) Standard Practice for Interlaboratory Quantitation Estimate
- ASTM D6512-07 Standard Practice for Interlaboratory Quantitation Estimate
- ASTM E1272-02(2012) Standard Specification for Laboratory Glass Graduated Cylinders
- ASTM D6792-04a Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-04 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-05 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus
- ASTM D6792-07 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM D6792-13 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- ASTM E288-03 Standard Specification for Laboratory Glass Volumetric Flasks
- ASTM D7783-21 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
- ASTM E288-10(2017) Standard Specification for Laboratory Glass Volumetric Flasks
- ASTM E288-94(1998) Standard Specification for Laboratory Glass Volumetric Flasks
- ASTM E694-18(2024) Standard Specification for Laboratory Glass Volumetric Apparatus
- ASTM E617-97(2003) Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM C1021-08(2023) Standard Practice for Laboratories Engaged in Testing of Building Sealants
- ASTM E617-97(2008) Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM D1183-03(2019) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM E617-13 Standard Specification for Laboratory Weights and Precision Mass Standards
- ASTM E617-97 Standard Specification for Laboratory Weights And Precision Mass Standards
- ASTM E542-01(2007) Standard Practice for Calibration of Laboratory Volumetric Apparatus
- ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E694-18 Standard Specification for Laboratory Glass Volumetric Apparatus
- ASTM D6792-21 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E193-94(2010) Standard Specification for Laboratory Glass Micropipets
- ASTM D6792-23b Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21b Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-21a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E193-94(2005) Standard Specification for Laboratory Glass Micropipets
- ASTM D6792-23 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-23a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-22 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6792-22a Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D584-96(2005) Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
- ASTM E1878-97(2003) Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
- ASTM E1878-97 Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
- ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
- ASTM D584-96 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
- ASTM E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E832-81(1997) Standard Specification for Laboratory Filter Papers
- ASTM E1878-97(2008) Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
- ASTM E1878-97(2013) Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
- ASTM E832-81(2019) Standard Specification for Laboratory Filter Papers
- ASTM E1733-95(2002) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM E1733-95 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM E1733-95(2002)e1 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM C1077-06a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E694-99 Standard Specification for Laboratory Glass Volumetric Apparatus
- ASTM D1183-03 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D1183-03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D6792-17 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM C1077-10a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E694-99(2010) Standard Specification for Laboratory Glass Volumetric Apparatus
- ASTM C1077-06 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-05a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E237-02(2012) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
- ASTM C1222-19 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1077-10 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-10c Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-05b Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E694-99(2005) Standard Specification for Laboratory Glass Volumetric Apparatus
- ASTM C1077-11 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM C1077-07 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E1578-13 Standard Guide for Laboratory Informatics
- ASTM E832-81(2013) Standard Specification for Laboratory Filter Papers
- ASTM E1578-18 Standard Guide for Laboratory Informatics
- ASTM E603-23 Standard Guide for Room Fire Experiments
- ASTM E2335-22 Standard Guide for Laboratory Monitors
- ASTM E2335-12 Standard Guide for Laboratory Monitors
- ASTM E2335-08 Standard Guide for Laboratory Monitors
- ASTM G31-12a Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM E1733-95(2008) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM C1222-19a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM E832-81(2008) Standard Specification for Laboratory Filter Papers
- ASTM E2335-17 Standard Guide for Laboratory Monitors
- ASTM C1077-11a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM C1077-07a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-10d Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM E596-22 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM D3345-17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
- ASTM E982-94(2021) Standard Specification for Laboratory Glass Test Tubes
- ASTM C1068-21 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
- ASTM E951-94 Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
- ASTM C1077-02 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM E237-02(2007) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
- ASTM D584-10 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
- ASTM E237-02 Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
- ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
- ASTM D1413-07 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM C1077-03a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-00 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-03 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM D1413-07e1 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM D1413-99 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM E982-94(1998) Standard Specification for Laboratory Glass Test Tubes
- ASTM E982-94(2004) Standard Specification for Laboratory Glass Test Tubes
- ASTM E2335-04 Standard Guide for Laboratory Monitors
- ASTM E2014-11 Standard Guide on Metallographic Laboratory Safety
- ASTM E882-10(2016)e1 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM F205-94(1999) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
- ASTM D584-10(2018) Standard Test Method for Wool Content of Raw Wool—Laboratory Scale
- ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
- ASTM D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM F2059-06 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
- ASTM E596-96 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
- ASTM E882-10(2016) Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- ASTM D2168-10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM C1068-03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
- ASTM D698-07e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
- ASTM C1222-05 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM F2059-21 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask
- ASTM E960-93(2003) Standard Specification for Laboratory Glass Beakers
- ASTM E1403-97(2019) Standard Specification for Laboratory Glass Boiling Flasks
- ASTM F2059-06(2012)e1 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
- ASTM C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
- ASTM F2059-00 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask
- ASTM D698-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12thinsp;400 ft-lbf/ft3thinsp;(600 kN-m/m3))
- ASTM E1733-22 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM D1413-05 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM D3856-95(2000) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
- ASTM E2014-17 Standard Guide on Metallographic Laboratory Safety
- ASTM E438-92(2011) Standard Specification for Glasses in Laboratory Apparatus
- ASTM E960-93(2021) Standard Specification for Laboratory Glass Beakers
- ASTM D5166-97(2008)e1 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
- ASTM C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
- ASTM E1580-93(2002) Standard Guide for Surveillance of Accredited Laboratories
- ASTM E960-93(2008) Standard Specification for Laboratory Glass Beakers
- ASTM E982-94(2015) Standard Specification for Laboratory Glass Test Tubes
- ASTM E1403-97(2008) Standard Specification for Laboratory Glass Boiling Flasks
- ASTM E1733-95(2014) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM C1021-97 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
- ASTM C1222-05a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1077-11c Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM E1580-93 Standard Guide for Surveillance of Accredited Laboratories
- ASTM E2014-99 Standard Guide on Metallographic Laboratory Safety
- ASTM E1379-90(1999)e1 Standard Specification for Laboratory Glass Dewar Flask
- ASTM E1379-90(2022) Standard Specification for Laboratory Glass Dewar Flask
- ASTM E1403-97(2013) Standard Specification for Laboratory Glass Boiling Flasks
- ASTM E2327-15 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM D698-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort 40;12 400 ft-lbf/ft3 40;600 kN-m/m341;41;
- ASTM E2014-99(2005) Standard Guide on Metallographic Laboratory Safety
- ASTM E960-93(2013) Standard Specification for Laboratory Glass Beakers
- ASTM D1413-05b Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM E960-93(1997) Standard Specification for Laboratory Glass Beakers
- ASTM E1379-90(2016) Standard Specification for Laboratory Glass Dewar Flask
- ASTM E2327-15e1 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM D1413-05a Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- ASTM F3251-21 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Baffled Flask
- ASTM C1222-13e1 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM D4621-99 Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
- ASTM C1068-96e1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
- ASTM D4621-99(2004) Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
- ASTM E438-92(2024) Standard Specification for Glasses in Laboratory Apparatus
- ASTM E1405-98(1999)e1 Standard Specification for Laboratory Glass Distillation Flasks
- ASTM D6512-03 Standard Practice for Interlaboratory Quantitation Estimate
- ASTM E2327-04 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
- ASTM E1222-22 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
- ASTM D7263-09(2018)e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
- ASTM C1222-13 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM E785-81(2024) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E1405-98(2022) Standard Specification for Laboratory Glass Distillation Flasks
- ASTM E785-81(2017) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E1404-94(2019) Standard Specification for Laboratory Glass Conical Flasks
- ASTM D7847-12 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
- ASTM C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM C1222-09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM D7263-09(2018)e1 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
- ASTM E237-02(2024) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
- ASTM C1077-05be1 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM D2216-19 Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- ASTM D7263-09(2018) Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
- ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
- ASTM E1323-89(1994)e1 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
- ASTM E1397-91(2003) Standard Practice for the in vitro Rat Hepatocyte DNA Repair Assay
- ASTM D3856-95(2006) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
- ASTM E785-81(2006) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E193-94(2017) Standard Specification for Laboratory Glass Micropipets
- ASTM D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM E1405-98(2010) Standard Specification for Laboratory Glass Distillation Flasks
- ASTM E193-94(1999) Standard Specification for Laboratory Glass Micropipets
- ASTM E1404-94(2008) Standard Specification for Laboratory Glass Conical Flasks
- ASTM E1404-94(1998)e1 Standard Specification for Laboratory Glass Conical Flasks
- ASTM D5361/D5361M-11 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
- ASTM E438-92(2018) Standard Specification for Glasses in Laboratory Apparatus
- ASTM G18-88(1998) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- ASTM E1404-94(2003) Standard Specification for Laboratory Glass Conical Flasks
- ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
- ASTM E1323-15(2020) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
- ASTM C1077-05 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
Professional Standard - Meteorology, Standard Dose Laboratory
- QX/T 221-2013 Technical requirements for construction of meteorological metrological laboratory.Grade II standard laboratory
SCC, Standard Dose Laboratory
- ASTM D7783-12 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
- AENOR UNE-ISO/TR 22869 IN:2007 Clinical laboratories. Guide for the implementation in laboratories of the ISO 15189:2003 Standard. (ISO/TR 22869:2005)
- AASHTO T 265-2022 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AWPA E10-11 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AASHTO T 265-2015(2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AWPA E10-08 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AWPA E10-09 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AWPA E10-06 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AASHTO T 265-1993(2004) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AWPA E10-15 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AWPA E10-91 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AWPA E10-01 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- AWPA E10-12 Standard Method of Testing Wood Preservatives by Laboratory Soil-Block Cultures
- BS EN 29142:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS EN 61094-1:1995 Specification for measurement microphones-Specifications for laboratory standard microphones
- BS CWA 15793:2008 Laboratory biorisk management standard
- SN-CWA 15793:2008 Laboratory biorisk management standard
- 12/30234846 DC BS ISO 19238. Radiation protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- AS 2164:1995 Laboratory glassware - One-mark volumetric flasks
- DANSK DS/EN ISO 1042:1999 Laboratory glassware - One-mark volumetric flasks
- NS 4517:1985 Laboratory glassware — One-mark volumetric flasks
- NS-EN 45002:1989 General criteria for the assessment of testing laboratories
- AENOR UNE 66502:1991 General criteria for the evaluation of testing laboratories.
- BS 7503:1989 General criteria for laboratory accreditation bodies
- DANSK DS/EN 45002:1991 General criteria for the assessment of testing laboratories
- IEC 61094-1:1992/COR1:1993 Measurement microphones - Part 1: Specifications for laboratory standard microphones
- DANSK DS/EN 61094-1:2001 Measurement microphones - Part 1: Specifications for laboratory standard microphones
- CEI EN 61094-1:2001 Measurement microphones - Part 1: Specifications for laboratory standard microphones
- AASHTO R 18-2018(2022) Standard Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
British Standards Institution (BSI), Standard Dose Laboratory
- BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
- BS 7502:1989 General criteria for the assessment of testing laboratories
- BS EN 61094-1:2001 Specification for measurement microphones. Specifications for laboratory standard microphones
- BS EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS ISO 19238:2004 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS EN ISO 19238:2017 Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
CEN - European Committee for Standardization, Standard Dose Laboratory
- EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
HU-MSZT, Standard Dose Laboratory
Group Standards of the People's Republic of China, Standard Dose Laboratory
American National Standards Institute （ANSI), Standard Dose Laboratory
European Committee for Standardization (CEN), Standard Dose Laboratory
- EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003)
- prEN 29142-1992 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990)
- EN ISO 19238:2017 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- EN ISO 1042:1999 Laboratory Glassware - One-Mark Volumetric Flasks
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Dose Laboratory
- GB/T 16510-1996 The requirements for the competence of a radiation processing dosimetry calibration laboratory
- GB/T 16510-2008 The requirements for the competence of a radiation processing dosimetry calibration laboratory
- GB/T 13794-1992 Pyrometric reference cones for laboratory use
- GB/T 12806-1991 Laboratory glassware-one-mark volumetric flasks
- GB/T 12806-2011 Laboratory glassware.One-mark volumetric flasks
- GB/T 12808-2015 Laboratory glass instrument single marked line pipette
- GB/T 12808-1991 Laboratory glassware--One-mark pipettes
US-FCR, Standard Dose Laboratory
U.S. Environmental Protection Agency (U.S. EPA), Standard Dose Laboratory
AT-ON, Standard Dose Laboratory
中華人民共和國國家衛生和計劃生育委員會, Standard Dose Laboratory
GB-REG, Standard Dose Laboratory
AASHTO - American Association of State Highway and Transportation Officials, Standard Dose Laboratory
- T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- T265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils (Twentieth Edition)
The American Road & Transportation Builders Association, Standard Dose Laboratory
- AASHTO T 265-2015(R2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
- AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
Instrument Society of America (ISA), Standard Dose Laboratory
RU-GOST R, Standard Dose Laboratory
Association Francaise de Normalisation, Standard Dose Laboratory
- NF X50-062:1989 General criteria for the assessment of testing laboratories.
- NF T76-109:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
- NF T76-109*NF EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
- NF M60-220:2005 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics.
- NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
- NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
- NF X50-061:1989 GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES. (EUROPEAN STANDARD EN 45001).
- NF C97-331:1994 MEASUREMENT MICROPHONES. PART 1 : SPECIFICATIONS FOR LABORATORY STANDARD MICROPHONES. (EUROPEAN STANDARD EN 61 094-1).
- NF EN 61094-1:2001 Measuring microphones - Part 1: specification of laboratory standard microphones
- NF M60-220*NF EN ISO 19238:2017 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- NF M60-220:2014 Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
- NF EN ISO 19238:2017 Radiation protection - Performance criteria for service laboratories practicing biological dosimetry by cytogenetics
Danish Standards Foundation, Standard Dose Laboratory
- DS/EN 45002:1991 General criteria for the assessment of testing laboratories
- DS/EN 61094-1:2001 Measurement microphones - Part 1: Specifications for laboratory standard microphones
PL-PKN, Standard Dose Laboratory
Professional Standard - Commodity Inspection, Standard Dose Laboratory
Underwriters Laboratories (UL), Standard Dose Laboratory
RO-ASRO, Standard Dose Laboratory
- SR ISO 4094:1996 Paper, board and pulps - International calibration of testing apparatus-Nomination and acceptance of standardizing and authorized
- STAS 9713-1989 Laboratory glassware ONE-MARK VOLUMETRIC FLASKS
- STAS SR EN 45003-1993 General criteria for laboratory accreditation bodies
- STAS SR EN 45001-1993 Generai criteria for the operation of testing iaboratories
CZ-CSN, Standard Dose Laboratory
- CSN ISO 1146:1994 Fruit and vegetable products-Determination of ash insoluble in hydrochloric acid
German Institute for Standardization, Standard Dose Laboratory
- DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
- DIN 58985:2003 Laboratory medicine - Decision-marking criteria
- DIN EN 61094-1:2001 Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000); German version EN 61094-1:2000
- DIN EN 61094-1:2001-08 Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000); German version EN 61094-1:2000
- DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
- DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
GSO, Standard Dose Laboratory
- GSO ASTM D6792:2024 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories
- OS GSO ASTM D6792:2016 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- GSO ASTM D2216:2022 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- BH GSO ASTM D2216:2023 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- OS GSO IEC 61094-1:2014 Measurement microphones - Part 1: Specifications for laboratory standard microphones
- GSO ASTM D6792:2016 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
- GSO ISO 1042:2007 Laboratory glassware – one mark volumetric flasks
Professional Standard - Agriculture, Standard Dose Laboratory
AENOR, Standard Dose Laboratory
Society of Automotive Engineers (SAE), Standard Dose Laboratory
(U.S.) Ford Automotive Standards, Standard Dose Laboratory
- FORD FLTM AZ 102-1-2000 PREPARATION OF STANDARD LABORATORY REAGENTS AND INDICATORS (Replaces FLTM AZ 002-01, FLTM EU-AZ 002-01)
- FORD FLTM AZ 102-01-2000 PREPARATION OF STANDARD LABORATORY REAGENTS AND INDICATORS Replaces FLTM AZ 002-01, FLTM EU-AZ 002-01 [Replaced: FORD FLTM AZ 002-01, FORD FLTM EU-AZ 002-01]
未注明發布機構, Standard Dose Laboratory
- ASTM RR-E33-1004 1988 E0596-Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- DIN EN ISO 15195 E:2018-05 Competence requirements for calibration laboratories using reference measurement procedures in laboratory medicine (draft)
U.S. Air Force, Standard Dose Laboratory
TH-TISI, Standard Dose Laboratory
- TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories
Military Standard of the People's Republic of China-General Armament Department, Standard Dose Laboratory
- GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
- GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
YU-JUS, Standard Dose Laboratory
- JUS F.S3.011-1989 Standard method of test far wool content of raw wool. Laboratorv scale
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Standard Dose Laboratory
- IEEE 548-1984 Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity
International Electrotechnical Commission (IEC), Standard Dose Laboratory
- IEC 61094-1:2000 Measurement microphones - Part 1: Specifications for laboratory standard microphones
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Standard Dose Laboratory
IT-UNI, Standard Dose Laboratory
- UNI 6687-1973 Standard mortar. Water shrinkage measurement. laboratory test
SE-SIS, Standard Dose Laboratory
ZA-SANS, Standard Dose Laboratory
- SANS 61094-1:2009 Measurement microphones Part 1: Specifications for laboratory standard microphones
CENELEC - European Committee for Electrotechnical Standardization, Standard Dose Laboratory
- EN 61094-1:1994 Measurement Microphones Part 1: Specifications for Laboratory Standard Microphones
Acoustical Society of America (ASA), Standard Dose Laboratory
- ASA S1.15 PART 1-1997 Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones
Japanese Industrial Standards Committee (JISC), Standard Dose Laboratory
- JIS K 6877:2010 Adhesives-Guide to the selection of standard laboratory ageing conditions for testing bonded joints
VN-TCVN, Standard Dose Laboratory
ES-UNE, Standard Dose Laboratory
- UNE-EN ISO 19238:2018 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)