熟妇人妻一区二区三区四区,久久ER99热精品一区二区,真实的国产乱XXXX在线,性XXXX18精品A片一区二区

ASTM D3948-13
航空渦輪機燃料水分離特征便攜式分離儀測定的標準試驗方法

Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer


標準號
ASTM D3948-13
發布
2013年
總頁數
12頁
發布單位
美國材料與試驗協會
替代標準
ASTM D3948-14
當前最新
ASTM D3948-22
 
 
適用范圍

5.1 This test method provides a measure of the presence of surfactants in aviation turbine fuels. Like Test Methods D2550 and D3602, this test method can detect carryover traces of refinery treating residues in fuel as produced. They can also detect surface active substances added to or picked up by the fuel during handling from point of production to point of use. Certain additives can also have an adverse effect on the rating. Some of these substances affect the ability of filter separators to separate free water from the fuel.

5.2 The Micro-Separometer has a measurement range from 50 to 100. Values obtained outside of those limits are undefined and invalid. In the event a value greater than 100 is obtained, there is a good probability that light transmittance was reduced by material contained in the fuel used to set the 100 reference level. The material was subsequently removed during the coalescing portion of the test, thus, the processed fuel had a higher light transmittance than the fuel sample used to obtain the 100 reference level resulting in the final rating measuring in excess of 100.

5.3 Test Mode A function of the separometer will give approximately the same rating for Jet A, Jet A-1, MIL JP-5, MIL JP-7, and MIL JP-8 fuels as Test Methods D2550 and D3602. Using Mode A water separation characteristic ratings of Jet B and MIL JP-4 fuels will not necessarily be equivalent to Test Method D2550 but will give approximately the same rating as Test Method D3602. All Micro-Separometers have Test Mode A capability.

5.4 The Test Mode B option is used to determine water separation ratings for MIL JP-4 fuels containing fuel system corrosion and icing inhibitors. These ratings are approximately the same as those obtained using Test Method D2550.

5.5 Selection of Mode A or Mode B depends on the specific fuel and specification requirement. Table 1 identifies the recommended test method for various fuels.

TABLE 1 Applicable Test Mode for Various Fuels


            專題


            ASTM D3948-13相似標準


            ASTM D3948-13 中可能用到的儀器設備


            誰引用了ASTM D3948-13 更多引用





            Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
            京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號
            頁面更新時間: 2025-01-17 10:50